Specifications
•Best for All-Mountain, Freeride, Freestyle, Advanced, Intermediate, Flex - Medium
•Size: 147 cm
•Side cut radius: 6.8 m
•Tail: 290 mm
•Waist: 255 mm
•Nose: 302 mm
•Recommended binding sizes: S/M
•Rider weight Max: 85
•Rider weight Min: 60
•Tapered directional: Tail width is slightly tapered (2-20mm). This loosens up turning initiation and improves floatation in deeper snow without sacrificing edge hold on hardpack.
•Rock Out Camber: Flat between your bindings for stability, Camber near the feet for response and a rocker on the tip/tail for pressability.
•Radial: Created from a perfect circle, Radial is the classic sidecut for consistent response forward and switch.
•Ghost Basalt stringers: Basalt stringers are sewn into a trial layer for durable pop, control and damp ride at high speed, and easy maneuverability when you’re keeping it mellow.
•Sintered: An industry standard for quality sintered base materials. Provides a moderate balance between the speed created by a hard surface and good wax retention.
•Aspen SLCT: Every single wood strip is hand selected to ensure unparalleled core quality and lightness.
•Popster: The core is strategically milled inside of the insert packs, allowing the board to flex more naturally underfoot and transfer energy into the nose and tail for added pop.
•Fine stone finish: Our fine stone finish is particularly efficient on our Sintered EG base, speed up in powder or softer snow conditions.
•Natural wax: A paraffin-free wax compound made from natural ingredients. A non-pollutant compound held to the highest standards of glide speed.
•All-Mountain EB: All-Mountain ready, right out of the wrapper. Equipped with a 1-degree bevel in the nose and tail and a 2-degree bevel between the feet for superior edge hold and no hang ups.
•Inserts: 4x2 Inserts
•ABS: The mollecular structure can be described as a concrete bar combining toughness for energy transfer and dampening properties for impact absorption.
•BIAX MD fiberglass: Medium density European-made fiberglass layers guarantee a consistent quality level, for light and lively boards.
•30% Bio-based resin: This bio-epoxy resin is made with 30% of its molecular structure derived from plants.